![clp ge fanuc versamax clp ge fanuc versamax](https://idoc.pub/img/crop/300x300/k6nqxowdyzlw.jpg)
This transaction is occurring within the US. The load current for each point is 0.5 amps for 30 volts. Output voltage ranges from 10.2 to 30 volts. The input impedance is rated at a maximum of 10 kOhms. When connected to a 5v backplane, this module consumes a maximum of 70 milliamps of current. Note: These filter times are added to the basic configuration input response time, meaning that the total response time when the default filter is used will be 1.5 milliseconds. The default filter time is one millisecond. These filters include the following: zero milliseconds, one millisecond, or seven milliseconds. To improve performance in environments with excessive interference or switch contact bouncing, the IC200MDD844 supports additional input filters which will alter response time. This module has an input on/off response time of 0.5 milliseconds in its basic configuration.
#Clp ge fanuc versamax upgrade#
This module also supports negative logic and 12 voltage output however, this will require an upgrade to the IC200MDD844C or better version. All input points for this device are positive logic, meaning they take the current from attached devices and return it to the common wire.
![clp ge fanuc versamax clp ge fanuc versamax](https://elektro-technik-grote.de/media/image/product/15390/lg/ge-fanuc-ic200mdd842c-teil-der-versamax-i-0.jpg)
All output points for this module are either positive logic or sourcing types, meaning these points provide positive DC voltage to the loads. These points are divided across three groups, one of which contains 16 outputs, while the other two each contain eight inputs. In total, this module provides 32 input and output points.
![clp ge fanuc versamax clp ge fanuc versamax](https://gefanuc.in/Ge-Fanuc/PLC/images/Ge-Fanuc-PLC-RX3i.jpg)
Made by General Electric as part of the VersaMax series, the IC200MDD844 is a discrete mixed input and output module.